The system can apply pseudo-dynamic and quasi-static loads on the full-scale test specimen:
(a) Buildings up to three storeys (10m),
(b) Bridge piers up to 10m height,
(c) Other structures, components and assemblages.

1.   Made of M45 Grade High Performance RCC
2.   L-Shaped Wall with through 80mm diameter holes (With MS sleeves) at 600mm pitch
3.   Structural floor footprint -19m x 9m
4.   Slab Dimension - 25m x 12m
5.   Electric overhead crane capacity - 20/5 Ton
6.   Wall Height - 11m
7.   Short Wall Thickness – 3m
8.   Slab Thickness – 1m

It can test Isolation devices and Bridge Bearings under biaxial loads

1.   Vertical compression load capacity-12000 kN
2.   Horizontal cyclic load capacity-3000 kN
3.   Displacement Capacity- ±250mm

Currently NETF has 3 Servo Valve Actuators-
1. Dynamic Actuator-I

1.   Capacity-1000kN
2.   Stoke- ±250mm str

2. Dynamic Actuator-II

1.   Capacity-500kN
2.   Stoke- ±250mm str

3. Static Actuator-II

1.   Capacity-1000kN
2.   Stoke- 400mm str

These Actuators are powered by a 250 lpm hydraulic power supply.

Specifications

1.   Oscilloscope
2.   Accelerometers
3.   Transducers Conditioner
4.   Shake Table
5.   Single Storey Shear Frame
6.   Type - Cylindrical CAM
7.   Capacity – 30kg
8.   Amplitude-0.5, 1, 2 & 10mm

Specifications

1.   Displacement- 38mm
2.   Maximum Payload- 150kg
3.   Force Capacity- Sine = 600 kg(f)
   Random = 420 kg(f)
4.   Frequency Range- 5-2000Hz

Specifications

1.   Oscilloscope
2.   Accelerometers
3.   Transducers Conditioner
4.   Shake Table
5.   Three Storey Shear Frame
6.   Type - Cylindrical CAM
7.   Capacity – 30kg
8.   Amplitude-0.5, 1, 2 & 10mm