मालवीय राष्ट्रीय प्रौद्योगिकी संस्थान जयपुर (राष्ट्रीय महत्व का संस्थान)
Malaviya National Institute of Technology Jaipur (An Institute of National Importance)
Department of Mechanical Engineering
Go Back

    2020
  • AK Saini, K Paritosh, AK Singh, V Vivekanand, "CFD approach for pumped-recirculation mixing strategy in wastewater treatment: Minimizing power consumption, enhancing resource recovery in commercial anaerobic digeste" , Journal of Water Process Engineering (Elsevier) Volume :101 / 55 / 2020
  • P.Athanker and A.K. Singh, "Elastic and elasto-plastic analysis of Ti6Al4V micro-lattice structures under compressive loads" , Mathematics and Mechanics of Solids (Sage) Volume :2020 / 55-70 / 2020
  • , D Pandel, MK Banerjee, AK Singh, "1. A Review of the Mg 2 (Si, Sn) Alloy System as Emerging Thermoelectric Material: Experimental and Modeling Aspects" , Journal of Electronic Materials (Springer ) Volume :2020 / 1-27 / 2020
    • 2017
  • Kavita Verma, A.B. Gupta, Amit Singh, "Optimization of Chlorination Process and Analysis of THMs to Mitigate Ill Effects of Sewage Irrigation" , Journal of Environmental Chemical Engineering (Elsievier ) Volume :0 / 0-0 / 2017
  • Vimal Kumar Pathak and Amit Kumar Singh, "Investigating Alignment E®ect on Inspection Accuracy of AM Part Using 3D Scanner" , World Scientific (Wiley) Volume :16 / 1-13 / 2017
  • Vimal Kumar Pathak, Amit Kumar SIngh, Ramanpreet Singh, Himanshu Chaudhary, "A modified algorithm of Particle Swarm Optimization for form error evaluation DOI: https://doi.org/10.1515/teme-2016-0040" , Technical Measurement (De GRUYTER) Volume :84 / 0-0 / 2017
  • Vimal Pathak and Amit Kumar ingh, "Optimization of Morphological Process Parameters in Contactless Laser Scanning System Using Modified Particle Swarm Algorithm https://doi.org/10.1016/j.measurement.2017.05.049" , Measurement (Elsievier ) Volume :0 / 0-0 / 2017
  • Ramanpreet Singh, Himanshu Chaudhary, Amit Kumar Singh, "Defect-Free Optimal Synthesis of Crank-Rocker Linkage Using Nature-Inspired Optimization Algorithms, DOI 10.1016/j.mechmachtheory.2017.05.018" , Mechanism and Machine Theory (Elsievier ) Volume :0 / 0-0 / 2017
  • Ramanpreet Singh, Himanshu Chaudhary, Amit Kumar Singh ,, ","A New Hybrid Teaching-Learning-Particle-Swarm Optimization Algorithm for Synthesis of Linkages to Generate Path" " , Sadhna (Springer) Volume :00 / 0-0 / 2017
    • 2016
  • Vimal Kumar Pathak, Amit Kumar Singh, M. Sivadasan, N. K. Singh, "Framework for Automated GD&T Inspection Using 3D Scanner" , Journal of The Institution of Engineers (India): Series C (Springer) Volume :98 / 1-9 / 2016
  • Amit Aherwar, Amit Kumar Singh, Amar Patnaik, "Cobalt Based Alloy: A Better Choice Biomaterial for Hip Implants" , Trends in Biomaterials & Artificial Organs :: an international journal (Society for Biomaterials and Artificial Organs ) Volume :30 / 50-55 / 2016
  • Vimal Kumar Pathak, Amit Kumar Singh, "An integrated reverse engineering approach for accuracy control of free-form objects" , Archive of Mechanical Engineering (Walter de Gruyter GmbH) Volume :63 / 1-11 / 2016
  • Vimal Kumar Pathak, Amit Kumar Singh, "Assessing the challenges and issues in entry-level additive manufacturing machine" , International Journal of Rapid Manufacturing (IJRAPIDM) (Inderscience Publishing ) Volume :6 / 53-74 / 2016
  • Chitresh Nayak, Amit Singh, Himanshu Chaudhary, "Topology Optimization of Transtibial Prosthesis Socket using Finite Element Analysis" , International Journal of Biomedical Engineering and Technology (Inderscience Publishing ) Volume :9 / 1-12 / 2016
  • Chitresh Nayak, Amit Singh, Himanshu Chaudhary, "Pressure distribution at lower limb/prosthetic socket interface" , International Journal of Pharma and Bio Sciences, (International Journal of Pharma and Bio Sciences) Volume :7 / 1258 – 1 / 2016
  • Chitresh Nayak, Amit Singh, Himanshu Chaudhary and Abhishek Tripathi. , "A novel approach for customized prosthetic socket design." , Biomedical engineering applications, basis & communications (World Scientific) Volume :28 / 1-10 / 2016
  • Vimal Pathak, Chitresh Nayak, Amit Singh, Himanshu Chaudhary , " A virtual reverse engineering methodology for accuracy control of transtibial prosthetic socket" , Biomedical engineering applications, basis & communications (World Scientific) Volume :28 / 1-9 / 2016
  • Amit Aherwar , Amit Singh and Amar Patnaik, "Study on mechanical and weaCharacterization of novel Co30Cr4Mo biomedical alloy with added nickel under dry and wet sliding conditions using Taguchi approach" , Proc IMechE Part L: J Materials: Design and Applications (Sage ) Volume :20 / 1-18 / 2016
    • 2015
  • Amit Aherwar, Amit K Singh, Amar Patnaik, "Current and future biocompatibility aspects of biomaterials for hip prosthesis" , Journal on Bioengineering. (AIMS Press) Volume :3 / 23-43 / 2015
  • Amit Aherwar, , Amit K Singh, Amar Patnaik, "Current and future biocompatibility aspects of biomaterials for hip prosthesis" , Bioengineering (AIMS Press) Volume :3 / 23-43 / 2015
  • Sumit Gupta, G.S. Dangayach, A. K. Singh, P. N. Rao , "“Analytic Hierarchy Process (AHP) Model for Evaluating Sustainable Manufacturing Practices in Indian Electrical Panel Industries" , Procedia - Social and Behavioural Sciences- Science Direct (Elsevier) Volume :3 / 11-15 / 2015
  • Sumit Gupta, G. S. Dangayach, A. K. Singh, "Key Determinants of Sustainable Product Design and Manufacturing" , Science Direct Procedia CIRP (Elsevier) Volume :26 / 99-102 / 2015
    • 2014
  • Sinha R, Singh A.K., Mathur S, "Multiobjective optimization for minimum residual fluoride and specific energy in electrocoagulation process" , Desalination and Water Treatment (Taylor and Francis) Volume :1 / 1-11 / 2014
    • 2010
  • Singh A.K., Regalla S.P.,, "Response Surface Based Simulation Modeling for Selective Laser Sintering Process" , Rapid Prototyping Journal (Emerald) Volume :16 Issue 6 / / 2010
  • Singh A.K., Regalla S.P , "DOE based three dimensional finite element analysis for predicting density of a laser sintered part" , Rapid Prototyping Journal (Emerald) Volume :16 Issue 6 / 112 / 2010
    • 2009
  • Singh A.K., Regalla S.P , "Simulation based two level factorial designed experiments for optimization of selective laser sintering process" , International Journal of Computer Aided Engineering and Technology (Inderscience) Volume :Vol1 No 3 / 322-337 / 2009
    • 2008
  • , "Numerical slicing and optimum hatching of parametric B-Rep solids in layered manufacturing" , Int. J. Computer Aided Engineering and Technology, (Inder Science) Volume :Vol 1 No 1 / / 2008

    2015
  • Vimal Kumar Pathak, Amit Kumar Singh, M Sivadasan, "Framework for Automated GD&T Inspection Using 3D Scanner" , International Conference on Additive Manufacturing, 3D Printing and 3D Scanning, by :Springer at Chennai / / 2015
  • Sagar Kumar, Amit Kumar Singh, M Sivadasan, "Dimensional Accuracy of RP Pattern and RTV Mold Using Taguchi Technique" , International Conference on Additive Manufacturing, 3D Printing and 3D Scanning, by :Springer at Chennai / / 2015
    • 2014
  • Chitresh Nayak, Amit Singh, Himanshu Chaudhary, "A Review of Experimental Measurements of Stump Socket Pressure and Findings" , Emerging Research Domain (NCBMS 2014) by :Bio- Mechanical Sciences at Bhubaneswar / / 2014
  • Sagar Kumar, Amit Kumar Singh, M Sivadasan, "Dimensional Issues in the Integration of RP Pattern and RTV Molds" , International Colloquium on Materials, Manufacturing and Technology by :Conference Proceedings at Chennai / / 2014
    • 2013
  • Amit Aherwar, Amit Singh, Amar Patnaik, "A Review Paper on Rapid Prototyping and Rapid Tooling Techniques for Fabrication of Prosthetic Socket" , VRAP 2013 by :VRAP at Liera Portugal / / 2013
  • Chitresh Nayak, Amit Singh, Himanshu Chaudhary, "Using Reverse Engineering and Rapid Prototyping to Compare the PTB and TSB Socket Design for Lower Limb Prosthesis" , International Conference on Additive Manufacturing by :International Conference on Additive Manufacturing at Bangalore / / 2013
  • Sumit Gupta, Govind Saran Dangayach And Amit Kumar Singh, "Implementation of Shainin DOE Variable Search Tool for Sustainable Manufacturing in an Automotive Industry" , ISTE Delhi by :Technological Universities and Institutions in New Knowledge Age at Delhi / / 2013

  • Book Chapter, "Alignment Based Inspection Framework for Additive Manufactured Parts" ISBN:978-81-322-2738-0 published by - Springer Year: 2016 authors- Vimal Kumar Pathak, Amit Kumar Singh

  • International level Short Term Course on GIAN Course on “Digital Microfluidics: Design and Applications at MNIT JAIPUR, Jaipur, INDIA from 02-12-2020 to 06-12-2019
  • National level Short Term Course on AICTE Sponsored ATAL Course on 3D Printing and Design at MNIT Jaipur, Jaipur, India from 02-10-2019 to 06-10-2019
  • International level Short Term Course on Advanced Course on Sustainability in Materials & Design at MNIT JAIPUR, JAIPUR, INDIA from 21-05-2019 to 01-06-2019
  • National level Short Term Course on AICTE Sponsored ATAL COurse on 3D Printing & Design at MNIT JAIPUR, JAIPUR, INDIA from 25-03-2019 to 29-03-2019
  • International level Short Term Course on GIAN Course on Liquid Interfaces, Drops and Sprays - Prof. Alidad Amirfazli at MNIT Jaipur, Jaipur, INDIA from 11-07-2016 to 15-07-2016
  • National level Workshop on Advanced Course in Liquid Interfaces, Drops and Sprays at MNIT , Jaipur, India from 11-07-2016 to 15-07-2016
  • National level Workshop on Simulation Based Engineering Science: A Scientific Approach to Engineering at MNIT, Jaipur, India from 20-04-2015 to 21-04-2015
  • National level Conference on National Conference of Sustainable Manufacturing for a Brighter Future at MNIT, Jaipur, India from 02-01-2015 to 03-01-2015
  • National level Symposia on National Symposium on BioMaterials and Bio Engineering at MNIT, Jaipur, INDIA from 11-12-2014 to 12-04-2014
  • National level Symposia on National Symposium on Bio Materials and Bio Engineering at MNIT, Jaipur, India from 11-12-2014 to 12-12-2014
  • National level Seminar on SAE Student Convention at MNIT, Jaipur, India from 13-09-2014 to 13-09-2014
  • National level Seminar on All India Seminar on Sustainable Manufacturing at MNIT, Jaipur, India from 18-01-2014 to 19-01-2014
  • National level Seminar on Etiquettes and Skill Devlopment for Interviews through Training and Placement Cell at MNIT, Jaipur, India from 26-10-2013 to 28-10-2013
  • National level Workshop on Technical Induction Programme for GET of Bosch Ltd. Through Industry Institution Interaction at MNIT, Jaipur, India from 30-09-2013 to 04-10-2013
  • National level Short Term Course on Computation Techniques for Advanced Research in Composites at MNIT, Jaipur, India from 12-06-2013 to 17-06-2013
  • National level Short Term Course on Introduction to Finite Element Method (FEM) with Hands-on Altair Hyper Works at MNIT, Jaipur, India from 03-06-2013 to 07-06-2013
  • National level Workshop on Optimisation Techniques for Engineering Design at MNIT, Jaipur, India from 20-03-2013 to 24-03-2013
  • National level Workshop on Two Day Workshop in Rapid Prototyping at BITS PILANI, PILANI, INDIA from 08-03-2012 to 09-03-2012

  • Associate Member of Society of Automotive Engineers (SAE)

    Awarded
  • Divija Pandel on Design of Mg2(Si-Sn) based thermoelectric generator by modeling and simulation Year - 2022
  • Sagar Kumar on Design, Development and Analysis of rapid tooling mold and mold inserts for minimum shrinkage and warpage Year - 2019
  • Ramanpreet on Optimal synthesis of linkages for knee joint supporting devices Year - 2018
  • Vimal Pathak on Framework for accuracy control and contactless inspection of parts with free-form surfaces and GD&T features using reverse engineering approach Year - 2018
  • Amit Aherwar on Design, Development and tribology analysis of Total Hip Joint Replacement for Human Body Structure Year - 2017
  • Chitresh Nayak on Customised Design & Development of Prosthesis Socket Using Reverse Engineering and Rapid Prototyping Year - 2017
  • Sumit Gupta on Some issues in Sustainable Manufacturing: A Select Study of Indian Manufacturing Companies Year - 2016
  • Prashant Athanker on Conformal Porosity Gradients for Implants using Latticce structures Year - 2015
    • Ongoing
  • Gurpreet Singh on Dynamic Alignment of Lower Limb Prostheses Year - 2021
  • Preeti Chauhan on Prosthetic feet vibrational characterization and stability analysis on gait of lower limb prosthesis Year - 2020
  • Radheshyam Rathore on GAIT Evaluation & Analysis of Novel Lower Limb Prosthesis using Customized Wearable setup Year - 2019
  • Dharmanshu Singh Sodha on Study on Stone Processing Industry of Rajasthan for its Sustainability Year - 2018
  • Deepika Shekhawat on Mechanical, Biological and tribology characterizations of bioceramic composites for bio-medical applications Year - 2018
  • Atul Kumar Sharma on Inorganic/Organic thin films for devices application Year - 2017

Title Total Outlay
(In Lacs)		 Year Funding Agency Role
A Risk Assessment Index for Prediction and Prevention of Silicosis among Stone Workers in Rajasthan 7.132022-2024Directorate of Specially Abled Person, Government of RajasthanCo-PI
Design and Development of Energy Efficient Microchannel Based Solvent Recovery Unit for Fermentation and Active Pharmaceutical Ingredient (API) Production43.952022-2025Core Research Grant-Science and Engineering Research Board (SERB)-DSTCo-PI
Upcycled Plastic Prosthetics (UPP) Frontiers Follow On Grant49.002020-2022Royal Academy of Engineering, UKPI
Accessible Recycle Material (ARM) Prosthetics 25.002018-2019GCRFPI
Effective Product Development Through Integration of Reverse Engineering and Additive Manufacturing25.002016-2016DSTPI

  • Associate Dean, Student Welfare (CACS) in MNIT JAIPUR from - 12-02-2021 to Till Date
  • Warden in MNIT JAIPUR from - 09-04-2015 to Till Date
  • Coordinator CACS under Dean Student Welfare (DSW) in MNIT Jaipur from - 01-08-2019 to 11-02-2021
  • Coordinator- Centre for Advance Design in MNIT JAIIPUR from - 11-07-2014 to 09-04-2015

SNo. Type Title Event Place Schedule
1TalkDesigning Orthopedic Implants with Desired Porosity using IntralatticceChallenges and Opportunities in Biomedical Applications of Additive Manufacturing using Medical Image Processing (BAAM-MIP) at IITDM JabalpurIIITDM JABALPURMar-2020
2KeynoteProstheses and Orthoses - Challenges and OpportunitiesBiomedical Applications of Additive Manufacturing using Medical Image Processing (BAAM-MIP)IITDM JabalpurFeb-2020
3KeynoteHuman GAIT - Mechanical and Kinematic Alignment in TKAApplication of MATLAB in BIOENGINEERINGIIT INDOREJan-2020
4Talk 3D Kinematics and Inverse Dynamics MATLAB Tool Box for Human GAIT.Applications of MATLAB in BIO-EngineeringIIT IndoreJan-2020
5Keynote3D Printing ApplicationsTEQIP-III sponsored FDP on 3D printing, CNC Machine (Lathe and Milling); Theoretical and Experimental AspectGovernment Engineering College BanswaraDec-2019
6TalkFEM Applications: Topology OptimisationAICTE sponsored ATAL Programme on FEM at MNIT Jaipur from December 12- December 16, 2019.MNIT JAIPURDec-2019
7TalkMODELLING AND SIMULATION OF TI6AL4V MICRO-LATTICE STRUCTURES FOR ADDITIVE MANUFACTURING60th International Conference of Machine Design Departments organized Brno University of TechnologyBrno University, Czech RepublicOct-2019
8TalkDesign of ExperimentsSTTP on System Dynamics Simulation and Research Techniques from August 31st to September 4th, 2019MNIT JAIPURSep-2019
9TalkIndustrial Manipulators and Kinematics of Industrial ManipulatorsAICTE Sponsored programmme on “Robotics: Theory, Concepts and Implementation” during 24-28 May 2019 MNIT JAIPURMay-2019
10Talk3D Printed MicrofluidicsFDP on Fundamentals and Applications of Microfluidics from 1st April to 5th April 2019 organised by Chemical Engineering Department at MNIT JaipurMNIT JAIPURApr-2019
11TalkInvited TALK on Tools for Innovation – TRIZ (Theory of Inventive Problem Solving at NIT Utrakhand Faculty Development Programme on “Design Thinking for Innovative Products”.NIT UTrakhand - Srinagar CampusMar-2019
12Keynote1. Invited Talk on “Accessible Recycled Material Prosthetics” during National Conference on “Disability and Social Inclusion – The Role of Technology”IIT GuwahatiJan-2019
13KeynoteScope of Research and Research methodologyNational Conference: Sustainable and Emerging Trends in Engineering (NCSETE -2018)” on 03-04 April, 2018.JaipurApr-2018
14Keynote3D Printing Technologies for the Rehabilitation and Biomedical Engineering 3rd International Conference on “Innovative Advancements in Engineering and Technology (IAET-2018)Department of Electronics & Communication, School of Engineering & Technology, Jaipur.Mar-2018