मालवीय राष्ट्रीय प्रौद्योगिकी संस्थान जयपुर (राष्ट्रीय महत्व का संस्थान)
Malaviya National Institute of Technology Jaipur (An Institute of National Importance)
Department of Mechanical Engineering

29

Journal Publications

14

Conference Publications

1

Research Projects

6

PhD Research Supervised

1

Awards & Honours

Qualifications
  • Ph.D.(Mech. Engg.) from Birla Institute of Technology and Science Pilani (2011)
    M.E.(Mech. Engg.) from Birla Institute of Technology and Science Pilani (2004)
    B.E.(Mech. Engg.) from C R State College of Engineering Murthal Sonepat (M D University Rohtak)(2000)
Research Interests

Computational method for linear/non-linear problems, Fracture Mechanics, Multiscale Modelling and Simulation of Nanocomposites, Finite Element Method.

Brief Research Profile

Dr. Dinesh Kumar received his ME in 2004 and Ph.D. in 2011 both from BITS Pilani. Before joining MNIT Jaipur in 2012, he had served BITS Pilani for 8 years. He has over 14 years of teaching experience at UG and PG levels at BITS Pilani and MNIT Jaipur. His current teaching interest is in the areas of Design, Solid Mechanics, Continuum Mechanics and FEM, and carrying out research in the areas of Computational Mechanics at various time and length scales. He has published more than 45 papers in international and national journals and conferences of high repute. He has guided 04 Ph.D. scholars and more than 15 M.Tech. students in his areas of research. He is presently working on Phase Field Modeling of Fracture in Materials, and Multiscale Modelling and Analysis of nanocomposites.

    2021
  • A Kumar, D Kumar, K Sharma, "An Analytical Investigation on Linear and Nonlinear Vibrational Behavior of Stiffened Functionally Graded Shell Panels Under Thermal Environment" , Journal of Vibration Engineering & Technologies Volume :DOI / - / 2021
  • A Kumar, D Kumar, "Vibration analysis of functionally graded stiffened shallow shells under thermo-mechanical loading" , Materials Today: Proceedings Volume :44 / 4590-4595 / 2021
  • 2020
  • S K Sinha, D Kumar, A Patnaik, "An investigation on thermal stability of single wall carbon nanotubes (SWCNTs) by molecular dynamics simulations" , Materials Today: Proceedings Volume :44 / 4940-4944 / 2020
  • 2019
  • Singh, A. and Kumar, D., "Effect of functionalization on the elastic behavior of graphene nanoplatelet-PE nanocomposites with interface consideration using a multiscale approach" , Mechanics of Materials Volume :132 / 18-30 / 2019
  • Srivastava, A. and Kumar, D., "Postbuckling behavior of functionally graded CNT-reinforced nanocomposite plate with interphase effect" , Nonlinear Engineering Volume :8 / 496–512 / 2019
  • 2018
  • Singh, A. and Kumar, D., "Effect of temperature on elastic properties of CNT-polyethylene nanocomposite and its interface using MD simulations" , Journal of Molecular Modeling Volume :24 / 178 / 2018
  • Srivastava, A. and Kumar, D., "Postbuckling behaviour of graphene-reinforced plate with interfacial effect" , Archives of Mechanics Volume :30 / 3-36 / 2018
  • Singh, A. and Kumar, D., "Temperature effects on the interfacial behavior of functionalized carbon nanotube–polyethylene nanocomposite using molecular dynamics simulation" , Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems Volume :233 / 3-15 / 2018
  • Srivastava, A. and Kumar, D., "Mechanical characterization and postbuckling behavior of carbon nanotube–carbon fiber reinforced nanocomposite laminate" , Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Volume :0 / 1989-1996 / 2018
  • Sharma, K. and Kumar, D., "Nonlinear stability analysis of a perforated FGM plate under thermal load" , Mechanics of Advanced Materials and Structures Volume :25 / 100-114 / 2018
  • 2017
  • Mokhalingam, A. Kumar, D. and Srivastava, A, "Mechanical Behaviour of Graphene Reinforced Aluminum Nano composites" , Materials Today: Proceedings Volume :4 / 3952-3958 / 2017
  • Sharma, K. and Kumar, D., "Elastoplastic Stability and Failure Analysis of FGM Plate with Temperature Dependent Material Properties under Thermomechanical Loading" , Latin American Journal of Solids and Structures Volume :14 / 1361-1386 / 2017
  • Srivastava, A. and Kumar, D., "A continuum model to study interphase effects on elastic properties of CNT/GS-nanocomposite" , Materials Research Express Volume :4 / - / 2017
  • Srivastava, A. and Kumar, D., "Post-buckling behaviour of carbon-nanotube-reinforced nanocomposite plate" , Sadhna Volume :42 / 129-141 / 2017
  • Srivastava, A. and Kumar, D., "Elastic Constants Prediction of Hybrid Nanocomposite" , Journal of Advanced Mechanical Engineering Volume :4 / 16-38 / 2017
  • 2016
  • Sharma, K. and Kumar, D., "Thermal and Mechanical Analysis of FGM Beam Using Generalized Theory" , Journal of Aerospace Sciences & Technologies Volume :68 / 128-140 / 2016
  • Srivastava, A. K. Mokhalingam, A. Singh, A. Kumar, D., "Molecular dynamics study of mechanical properties of carbon nanotube reinforced aluminum composites" , AIP Conference Proceedings Volume :1728 / 020297 / 2016
  • Srivastava, A. K. and Kumar, D., "Postbuckling of Nanocomposite Plate Reinforced with Randomly Oriented and Dispersed CNTs Modeled through RSA Technique" , International Journal for Multiscale Computational Engineering Volume :14 / 585-606 / 2016
  • Sharma, K. and Kumar, D., "Nonlinear stability and failure analysis of perforated FGM plate" , Indian Journal of Pure & Applied Physics Volume :54 / 665-675 / 2016
  • Kumar, D. and Srivastava, A., "Elastic properties of CNT- and graphene-reinforced nanocomposites using RVE" , Steel and Composite Structures Volume :21 / 1085-1103 / 2016
  • 2013
  • Kumar, D. and Singh,S.B., "Effects of boundary conditions on postbuckling strengths of composite laminate with various shaped cutouts under in-plane shear" , Journal of Composite Materials Volume :03 / 38 / 2013
  • Kumar, Dinesh and Singh S. B., "Postbuckling Strengths of Composite Laminates with a Central Circular/Elliptical Cutout Under in-plane Combined Loads" , Journal of Aerospace Sciences and Technologies Volume :65 / 778 / 2013
  • Kumar, Dinesh and Singh S. B, "Effects of flexural boundary conditions on failure and stability of composite laminate with cutouts under combined in-plane loads" , Composites Part B: Engineering Volume :45 / 657-665 / 2013
  • 2012
  • Kumar, Dinesh and Singh S. B., "Stability and failure of composite laminates with various shaped cutouts under combined in-plane loads" , Composites: Part B Volume :43(2) / 142-149 / 2012
  • 2011
  • Kumar, Dinesh and Singh S. B., "Effects of Cutout Location on Postbuckling Responses and Failure Characteristics of Composite Laminates" , Aeronautical Society of India Volume :63(2) / 172 / 2011
  • Kumar, Dinesh and Singh S. B., "Load Interaction Curves and Postbuckling Response of Composite Laminate with Circular Cutout under Combined In-plane Loading" , Composites Part B: Engineering Volume :42(5) / 1189-1195 / 2011
  • Kumar, Dinesh and Singh S. B., "Effects of Cutout Shapes on Postbuckling Response of Quasi-Isotropic Laminate under Combined In-Plane Loads" , World Journal of Engineering Volume :1 / 611-612 / 2011
  • 2010
  • Kumar, D. and Singh S. B., "Effects of Boundary Conditions on Buckling and Postbuckling Responses of Composite Laminate with Various Shaped Cutouts" , Composite Structures Volume :92 / 769-779 / 2010
  • Kumar, Dinesh and Singh S. B., "Postbuckling Strengths of Composite Laminate with Various Shaped Cutouts Under In-Plane Shear" , Composite Structures Volume :92(12) / 2966-2978 / 2010

    2021
  • Deependra Singh Meena, D. Kumar, N. K. Raghuwanshi, "Delamination Growth Analysis of Composite Laminates Under DCB, ENF, MMB Test Using Cohesive Zone Model Under Cyclic Loading" , International Conference on Advancements in Design and Tribology (ICADT-2021) by :SVNIT Surat at SVNIT Surat / / 2021
  • Abhilash, Dinesh Kumar, Gulab Pamnani, "Multiscale Modeling and Analysis for the Mechanical Responses of 8 HS Woven Nanocomposites" , International Conference on Advancements in Design and Tribology (ICADT-2021) by :SVNIT Surat at SVNIT Surat / / 2021
  • H.K. Satrawla, D. Kumar, G. Pamnani, "Phase Field Modelling of Crack Growth in High Entropy Alloys" , International Conference on Advancements in Design and Tribology (ICADT-2021) by :SVNIT Surat at SVNIT Surat / / 2021
  • 2020
  • Anubhav Kumar and Dinesh Kumar, "Vibration Analysis of Functionally Graded Stiffened Shallow Shells Under Thermo-Mechanical Loading" , Advances in Materials Processing &Manufacturing Applications(ICADMA 2020) by :MNIT Jaipur at MNIT Jaipur / / 2020
  • 2019
  • Anubhav Kumar and Dinesh Kumar, "Vibration Analysis of Stiffened Functionally Graded Material Shallow Shells With Different Geometries Under Thermal Environment " , 7th International Congress on Computational Mechanics and Simulation by :IIT Mandi at IIT Mandi / / 2019
  • 2017
  • Akhileshwar Singh and Dinesh Kumar, "Influence of Temperature on the Interfacial Mechanical Properties of CNT-Polyethylene Nanocomposite Using MD Simulations" , International Conference on Nanoscience and Nanotechnology (ICONN 2017) by :Scholarink at SRM University, Chennai, India / / 2017
  • 2014
  • Ashish Srivastava and Dinesh Kumar , "Effects of Different Matrix Material on Elastic Properties of CNT Reinforced Nanocomposites" , International Conference on Multifunctional Materials, Structures and Applications (ICMMSA 2014) by :MNNIT Allahabad at Allabhad / / 2014
  • Dinesh Kumar and Ashish Srivastava , "Characterization of Hybrid Nanocomposite" , The 58th Congress of the Indian Society of Theoretical and Applied Mechanics (An International Conference) by :The Indian Society of Theoretical and Applied Mechanics at Bangalore / / 2014
  • 2013
  • Dinesh Kumar and Kanishk Sharma, "Stress Analysis of Timoshenko FGM Beam Under Non-Uniform Thermal Loading" , The 58th Congress of the Indian Society of Theoretical and Applied Mechanics (An International Conference) by :The Indian Society of Theoretical and Applied Mechanics at BESU, Shibpur, Kolkatta / 47 / 2013
  • Dinesh Kumar and Kanshik Sharma , "Modelling and Analysis of Functionally Graded Beam" , Current Challenges in Structural Engineering by :Asia and Pacific Young Researchers and Graduates Symposium at Jaipur / 256 / 2013
  • Ashu Airan, Anshuman and Dinesh Kumar, "Effects of Various Material Combinations and Lay-Ups on Response of Composite Laminates Under Transverse Loading Using Hyperworks" , Current Challenges in Structural Engineering by :Asia and Pacific Young Researchers and Graduates Symposium at MNIT Jaipur / 228 / 2013
  • Dinesh Kumar and Kanshik Sharma , "Stress Analysis of Timoshenko FGM Beam Under Non-Uniform Thermal Loading" , Proceedings of the 58th Congress of the Indian Society of Theoretical and Applied Mechanics (An International Conference) by :The Indian Society of Theoretical and Applied Mechanics at Kolkata / / 2013
  • Dinesh Kumar and Kanishk Sharma, "Modelling and Analysis of Functionally Graded Beam" , 5th Asia and Pacific Young Researchers and Graduates Symposium (YRGS-2013) by :MNIT Jaipur at Jaipur / / 2013
  • 2011
  • Dinesh Kumar and Singh S.B. , "Effects of Flexural Boundary Conditions on Postbuckling Strengths of Composite Laminate Under Combined in-Plane Loads" , The Indian Society of Theoretical and Applied Mechanics by :SVNIT Surat at Surat / 56 / 2011

  • Book Chapter, "Thermomechanical Elastic-Plastic Stability and Failure Analysis of FGM Plate published in Emerging Trends of Advanced Composite Materials in Structural Applications" ISBN:978-981-16-1688-4 published by - Springer Singapore (Part of the Book Series: Composites Science and Technology) Year: 2021 authors- Editors: Shamsher Bahadur Singh, Madappa V. R. Sivasubramanian, Himanshu Chawla
  • Book Chapter, "Dynamic Buckling Analysis of FGM Plate Using Finite Element Method published in Stability and Failure of High Performance Composite Structures" ISBN:978-981-19-2424-8 published by - Springer Singapore (Part of the Book Series: Composites Science and Technology) Year: 2022 authors- Editors: Shamsher Bahadur Singh, Sudhirkumar V. Barai.

  • National level Workshop on Online Workshop on ABAQUS and FRANC3D at Malaviya National Institute of Technology Jaipur India, Jaipur, India from 24-03-2021 to 28-03-2021
  • National level Short Term Course on Finite Element Method and its Applications at Malaviya National Institute of Technology Jaipur India, Jaipur, India from 28-12-2020 to 01-01-2021
  • National level Workshop on AICTE Sponsored ATAL Academies Programme on Mathematical Modelling and Analysis of Basic Engineering Problems using FEM with Hands-on Hypermesh at MNIT, Jaipur, India from 16-12-2019 to 20-12-2019
  • National level Workshop on AICTE Sponsored ATAL Academies Programme on Design and Analysis of Mechanisms and Machines through Motionview and MATLAB at MNIT , Jaipur, India from 11-11-2019 to 15-11-2019
  • National level Short Term Course on TEQIP Sponsored ICT in Disaster Management at MNIT, Jaipur, India from 03-06-2019 to 07-06-2019
  • National level Short Term Course on TEQIP Supported STC on Advanced Structural Analysis and Finite Element Method at MNIT, Jaipur, India from 08-04-2019 to 12-04-2019
  • National level Short Term Course on TEQIP Supported STC on Advanced Mechanics of Continua at MNIT, Jaipur, India from 23-12-2018 to 27-12-2018
  • National level Short Term Course on Short Term Training Program on “Finite Element Method (FEM) and its Applications at MNIT, Jaipur, India from 04-06-2018 to 08-06-2018
  • International level Conference on 60th International Conference of Indian Society of Theoretical and Applied Mechanics (i.e., ISTAM 2015) at MNIT, Jaipur, India from 16-12-2015 to 19-12-2015
  • National level Symposia on Two Days National Symposium On Bio-Materials & Bio-Engineering at MNIT , Jaipur, India from 11-12-2014 to 12-12-2014
  • National level Short Term Course on Finite Element Methods Through Altair HyperWorks at MNIT Jaipur, Jaipur, India from 02-06-2014 to 06-06-2014
  • National level Workshop on Advance Developments in Beam & Plate Theories and Structural Dynamics at MNIT, Jaipur, India from 04-01-2014 to 06-01-2014
  • National level Short Term Course on COMPUTER AIDED DESIGN AND ANALYSIS OF MACHINE & STRUCTURAL ELEMENTS at Malaviya National Institute of Technology Jaipur, Jaipur, India from 23-12-2013 to 27-12-2013
  • National level Workshop on HYPERWORKS and FEA for MNIT Students at MNIT , Jaipur, India from 21-09-2013 to 28-09-2013
  • National level Short Term Course on Introduction to Finite Element Method (FEM) with Hands-on Altair HyperWorks at MNIT , Jaipur, India from 03-06-2013 to 07-06-2013

  • Life Member (LM 44972) of Indian Society for Technical Education
  • Life Member (L/655) of Indian Society Of Theoretical and Applied Mechanic
  • Member (#: 100413957) of ASME

    Awarded
  • Anubhav Kumar on Modeling and Analysis of Ceramics under High Strain Rate Year - 2022
  • Akhileshwar Singh on Multiscale Modeling of CNT and Graphene Based Nanocomposites Considering the Effects of Functionalization and Interfacial Region Year - 2019
  • Ashish Srivastava on Modeling and Characterization of CNT and Graphene Based Nanocomposites and an Investigation on the Postbuckling Behavior of Nanocomposite Plate Year - 2018
  • Kanishk Sharma on Modeling & Simulation for Stability and Failure Analysis of Functionally Graded Plate under Mechanical and/or Thermal Loading Year - 2018
  • Ongoing
  • Arvind Kumar Thakur on Investigation on failure and fracture analysis of nanocomposite material Year - 2018
  • Sumit Kumar Sinha on Thermal characterization of nanofiller reinforced nanocomposite with interfacial effect for high temperature thermal protection system: A Multi-scale approach Year - 2017

Title Total Outlay
(In Lacs)
Duration Funding Agency Role
Nanostructures (Carbon-Nano Tube (CNT)) Reinforced Nanocomposite based Heat Shield System for Spacecraft Applications20.202017-2019ISROPI

Title Total Outlay
(In Lacs)
Duration Funding Agency
Vetting of Design and Drawing of HOT and EOT Cranes1.772019-2020Khanna Enterprises Sri Ganganagar - Near Pari Chowk, Ridhi-Sidhi Sri Ganganagar
Summer Internship on Modelling, Simulation And Analysis Of Mechanisms And Machines1.862018-2018Participants Self-Financed
Modelling, Simulation and Analysis of Mechanisms and Machines2.102019-2019Participants Self-Financed

  • Associate Dean (Sports), Student Welfare in Malaviya National Institute of Technology Jaipur India from - 17-07-2022 to Till Date
  • DPGC Convener in Malaviya National Institute of Technology Jaipur India from - 01-07-2022 to Till Date
  • Coordinator (Department PhD Admission) in Malaviya National Institute of Technology Jaipur from - 07-06-2016 to 30-06-2022
  • Coordinator Time Table and Class Room Infrastructure Management in Malaviya National Institute of Technology Jaipur from - 29-05-2015 to 04-03-2022
  • First Year Coordinator in Malaviya National Institute of Technology Jaipur from - 01-03-2015 to 04-03-2022
  • Warden in Malaviya National Institute of Technology Jaipur from - 11-06-2014 to 31-07-2022
  • Co-coordinator (UG Scholarship) in Malaviya National Institute of Technology Jaipur from - 17-08-2012 to 30-04-2015

  • "DDRIPS­ Drunkard DRIving Preventive System", , Reg.No. 201611027413 [Filed by Controller General of Patents, Designs & Trade Marks (CGPDTM)] Filed Dt.11-08-2016
  • "e-Bike Electrically Powered Multiutility Bicycle", , Reg.No. 201611015177 [Filed by Controller General of Patents, Designs & Trade Marks (CGPDTM)] Filed Dt.09-08-2016

  • Vice-President of Indian Society of Theoretical and Applied Mechanics, HQ at IIT Kharagpur for given by General Body of Indian Society of Theoretical and Applied Mechanics (i.e., ISTAM ) Year - 2015

SNo. Type Title Event Place Schedule
1TalkAn Introduction to Mathematical Modelling and FEMTEQIP Sponsored One-week STTP on Recent Trends in Mechanical EngineeringInstitute of Engineering & Technology, Dr. Bhimrao Ambedkar University, Khandari Campus, AgraSep-2020
2TalkAn Introduction to Mathematical Modelling and Finite Element MethodTEQIP Sponsored e-STC on Computational and Experimental studies on Failure of MaterialsNIT JalandharSep-2020
3TalkNIT JalandharTEQIP Sponsored e-STC on Computational and Experimental studies on Failure of MaterialsNIT JalandharSep-2020
4TalkGeneral Introduction to Mathematical Modeling of Engineering Problems and their Solution using FEMSPARC sponsored one-week Workshop on “Characterization and Simulation of Advanced Materials"MNIT JaipurSep-2019
5TalkMathematical Modelling of Engineering problems and their Solution using FEMTEQIP Sponsored Workshop on Recent Trend in Mechanical EngineeringMLV TExtile College BhilwaraJul-2019
6TalkIntroduction to FEMTEQIP Sponsored Expert TalkGovt Engg College BhartpurOct-2018
7TalkFEM Preliminary and Formulation of 1-D Problems TEQIP sponsored Workshop on Fundamentals and Application of Finite Element MethodRajkiya Engineering College, Mainpuri, U.P.Sep-2018
8TalkMathematical Modeling and Simulation through FEMWorkshop on Automation, Simulation & ModelingAjmerJun-2018
9KeynoteFinite Element Methods and its ApplicationsTEQIP Sponsored Short Term Training Program on “Finite Element Method (FEM) and its ApplicationsMNIT JaipurJun-2018