मालवीय राष्ट्रीय प्रौद्योगिकी संस्थान जयपुर (राष्ट्रीय महत्व का संस्थान)
Malaviya National Institute of Technology Jaipur (An Institute of National Importance)
Department of Metallurgical and Materials Engineering

41

Journal Publications

50

Conference Publications

9

Research Projects

21

PhD Research Supervised

Qualifications
  • Ph.D.(Metallurgical Engineering) from University of Rajasthan(1997)
    M.E.(Metallurgical Engineering) from University of Rajasthan(1987)
    B.E.(Metallurgical Engineering) from University of Rajasthan(1983)
Research Interests

Metal Casting, Extractive Metallurgy, Materials Science.

    2023
  • Atirek Gaur, Rahul Kumar, Pushpender Singh, Upender Pandel, Anup Kumar Keshri, Swati Sharma, "Mechanical and Tribological Behavior of Titanium and Cerium Oxide-Reinforced Plasma-Sprayed AlNiCoCrSi HEA Coatings" , Metallurgical and Materials Transactions A (Springer ) Volume :54 / 47574769 / 2023 DOI: https://doi.org/10.1007/s11661-023-07197-4
  • Gaur, Atirek, Upender Pandel, and Swati Sharma, "A study of investigating the effects of variables and assessing the efficiency of air plasma spray as a coating technique" , Materials Today: Proceedings (Elsevier) Volume :in press / / 2023 DOI: https://doi.org/10.1016/j.matpr.2023.11.096
  • Premlata Rao, Sujata Singh, Krishna Kumar, Upender Pandel, Chandan Srivastava, "Understanding the evolution of microstructure, phase homogeneity, electrochemical characteristics and surface chemistry of electrodeposited MnCrCoFeNiCu high entropy alloy coating with reinforcement o" , Surface and Coatings Technology (Elsevier) Volume :471 / 129912 / 2023 DOI: https://doi.org/10.1016/j.surfcoat.2023.129912
  • 2021
  • Vijay Kumar Pandey, Sunil Kumar Jatav, Upender Pandel, Rajendra Kumar Duchaniya, "Influence of temperature on thermo physical properties of non-prototype material (CaO-Fe2O3, 21:79 by wt. %) for nuclear reactor" , Indian Journal of Engineering & Materials Sciences (CSIR-NIScPR, India) Volume :28 / 165-173 / 2021
  • Rahul Sen, Upender Pandel, "Conceptual kinetic study for the catalytic effect of limestone on mill scale reduction by low grade coal" , Powder Technology (Elsevier) Volume :378 / 510-520 / 2021
  • 2020
  • Sunil Kumar. Jatav, Vijay K. Pandey, Parimal P. Kulkarni, Arun K. Nayak, Upender. Pandel and Rajendra K. Duchaniya, "Effect of Air-Quenching on Properties of CaO-Fe2O3 and CaO-B2O3 Simulant Materials for Nuclear Reactor" , Journal of Physics: Conference Series (IOP Science) Volume :1455 / 1-7 / 2020
  • Rahul Sen, Upender Pandel, "Closed crucible reduction of lump powdered mill scale or iron ore by coal: The sequential methodology and mechanism for optimization of process parameters" , Advanced Powder Technology (Elsevier) Volume :31 / 3760-3773 / 2020
  • Sunil Kumar Jatav, Vijay Kumar Pandey, U Pandel, A K Nayak, Rajendra Kumar Duchaniya , "Thermo-physical Properties of CaO-Fe2O3 (26:74 by wt.%) Binary Mixture and Its Application in the Field of Nuclear Severe Accident Management" , International Journal of Scientific & Technology Research (The Mattingley Publishing Co., Inc.) Volume :9 / 5773-5778 / 2020
  • Mukesh Kr Chowrasia Akshay Kumar M K Banerjee U Pandel, "Effect of Aging on Structure and Properties of a Transformation-Induced Plasticity Aided High-Manganese Steel" , Journal of Materials Engineering and Performance ( ASM International) Volume :29 / 648–661 / 2020
  • Vijay Kumar Pandey, Sunil Kumar Jatav, Upendra Pandel, Rajendra Kumar Duchaniya,, "Effect of composition of thermal stability and microstructural Behaviour of Non-prototype Material (Cao-Fe2O3)" , Mechanical Engineering and Sciences (Article) Volume :15 / / 2020 DOI: https://doi.org/10.15282/jmes.15.1.2021.21.0622
  • Vijay Kumar Pandey, Sunil K.Jatav, U.Pandel, Rajendra Kumar Duchaniya, "Effect of soaking time on properties of non-prototype material (CaO-Fe2O3; 21:79 by wt. %)" , Materials Today (Materials Today) Volume :26 / 871-877 / 2020 DOI: https://doi.org/10.1016/j.matpr.2020.01.121
  • Sunil Kumar Jatav, Vijay Kumar Pandey, U. Pandel, A. K. Nayak, Rajendra Kumar Duchaniya, "Thermo-physical properties of CaO-Fe2O3 binary mixture and its application in the field of nuclear reactor as simulant material" , International Journal of Engineering and Advanced Technology (Blue Eyes Intelligence Engineering & Science Publication) Volume :9 / 1706-1709 / 2020
  • Vijay Kumar Pandey , Sunil Kumar Jatav , U.Pandel , R.K.Duchaniya, "Microstructural Analysis of CaO-Fe2O3 Heat Treated at Different Temperature" , Journal of Physics: conference Series (Journal of Physics) Volume :1455 / 1-5 / 2020
  • Premlata, Deepika Singh, Upender Pandel, Rajendra Kumar Duchaniya, "Graphene Oxide Reinforced High Entropy Alloy (CuNiFeCrMo-GO) Nanocomposite Coating Deposited by Electroless Coating Method on Mild Steel" , Materials Today: Proceedings (Elsevier) Volume :28 / 2411-2417 / 2020
  • R.K. Duchaniya, U. Pandel, P. Rao, "Coatings based on high entropy alloys: An overview" , Materials Today: Proceedings (Elsevier) Volume :44 / 44674473 / 2020 DOI: https://doi.org/10.1016/j.matpr.2020.10.720
  • 2019
  • Ravindra Singh, Amrita Chakravarty, Shubhankar Mishra, Ramesh C. Prajapati, Jit Dutta, Inder K. Bhat, Upender Pandel, Sampad K. Biswas, and Kuttanellore Muraleedharan, "AlN–SWCNT Metacomposites Having Tunable Negative Permittivity in Radio and Microwave Frequencies" , ACS Appl. Mater. Interfaces (American Chemical Society) Volume :11 / 48212-4822 / 2019 DOI: 10.1021/acsami.9b15909
  • 2018
  • Rahul Sen, Aditya Maan, Ujjwal Goyal, Aditi Birdhaniya, Upender Pandel, "In crucible reduction of mill scale by lean grade coal: Study of time, temperature and arrangement for optimum reduction conditions" , Materials Today: Proceedings (Elesvier) Volume :5 / 7256-7263 / 2018 DOI: https://doi.org/10.1016/j.matpr.2017.11.393
  • 2017
  • Robin Gupta, Ashok Sharma, Upender Pandel, Lorenz Ratke, "COARSENING KINETICS IN Al ALLOY CAST THROUGH RAPID SLURRY FORMATION (RSF) PROCESS" , Acta Metallurgical Slovaca (Material Science) Volume :23 / / 2017 DOI: 0.12776/AMS.V23I1.835
  • Akshay kumar, U.Pandel and M.K. Banerjee, "Effect of Mechanical properties of Fe/MWCNT Nanocomposites after vary the weight present of MWCNTs prepared by high energy ball milling" , International journal of Engineering Technology, Management and Applied Sciences ( Materials Science) Volume :5 / / 2017 DOI: -
  • Akshay Kumar , U. Pandel and M.K. Banerjee , "Effect of high energy ball milling on the structure of iron multiwall carbon nanotubes (MWCNT) composite" , Advances in Material Research (research gate) Volume :6 / / 2017 DOI: 10.12989/amr.2017.6.3.245
  • Anurag Hamilton, Ashok Sharma, Upender Pandel, "Effect of Impingement Angle on Erosion Resistance of HVOF sprayed WC-10Co-4Cr coating on CA6NM steel" , Key Engineering Materials (Material science and engineering) Volume :751 / / 2017 DOI: https://doi.org/10.4028/www.scientific.net/KEM.751.79
  • Robin Gupta, Ashok Sharma, Upender Pandel, Lorenz Ratke, "Effect of heat treatment on microstructures and mechanical properties of A356 alloy cast through rapid slurry formation (RSF) process" , International Journal of Cast Metals Research (International Journal of Cast Metals Research) Volume :30 / / 2017 DOI: //doi.org/10.1080/13640461.2017.1299394
  • Vatsala Chaturvedi, Ashok Sharma and Upender Pandel, "Effect of mechanical vibrations on grain refinement of AZ91 Mg alloy" , Materials Research Express (IOP science) Volume :4 / / 2017 DOI: 10.1088/2053-1591/aa64f5
  • Robin Gupta, Ashok Sharma, Upender Pandel and Lorenz Ratke, "Wear analysis of A356 alloy cast through rheometal process" , Materials Research Express (IOP Science) Volume :4 / / 2017 DOI: 10.1088/2053-1591/aa680c
  • Akshaykumar,U.Pandel and M.K. Banerjee, "Production of Iron Multiwall Carbon Nanotubes (CNT) Composite by Mechanical Alloying" , International Journal of Engineering Technology Science and Research (IJETSR) Volume :4 / / 2017 DOI: -
  • Robin Gupta, Ashok Sharma, UpenderPandel, Lorenz Ratke, "Effect of stirring speed on microstructure of A356 alloy cast through rheometal process" , International Journal of Material Research ( De Gruyter) Volume :108 / / 2017 DOI: https://doi.org/10.3139/146.111521
  • Anurag Hamilton, Ashok Sharma, UpenderPandel, "SOLID PARTICLE EROSION RESISTANCE OF HVAF-SPRAYED WC-10Co-4Cr COATING ON CA6NM STEEL" , Surface Review and Letters (WORLD SCIENTIFIC) Volume :24 / 01-04 / 2017
  • 2016
  • Shrikant, A. K. Nayak, U. Pandel, R. K. Duchaniya, "Vibrational, Structural and Thermal studies of Debris of 30%CaO-70%B2O3" , Journal of Materials Science & Surface Technology (Journal of Materials Science & Surface Technology) Volume :4 / 444-447 / 2016
  • M. J. Pawar, A. Patnaik, S.K. Biswas, U.Pandel, I.K. Bhat, S. Chatterjee, A.K. Mukhopadhyay, R. Banerjee, B.P. Babu, "Comparison of ballistic performances of Al2O3 and AlN ceramics" , International Journal of Impact Engineering (Elsevier Science Direct) Volume :98 / / 2016 DOI: https://doi.org/10.1016/j.ijimpeng.2016.08.002
  • Vandana Kaler, R. K. Duchaniya, and U. Pandel, "Synthesis of nano-titanium dioxide by sol-gel route" , AIP Conference Proceedings ( American Institute of Physics) Volume :020127 / 1724 / 2016
  • Shrikant , A. K. Nayak, U. Pandel , R. K. Duchaniya, "Vibrational, Structural and Thermal studies of Debris of 30% CaO-70% B2O3" , Journal of Materials Science & Surface Engineering (material science and surface engineering) Volume :4 / / 2016 DOI: -
  • 2015
  • Rahul Sen, Satender Dehiya, Upender Pandel, M.K.Banerjee, "Utilization of Low Grade Coal for Direct Reduction of Mill Scale to Obtain Sponge Iron: Effect of Reduction Size time and Particle Size" , Procedia Earth and Planetary Science (Elsevier) Volume :11 / / 2015 DOI: 10.1016/j.proeps.2015.06.003
  • Nikitha Gade, Gaurav Verma, Rahul Sen, Upender Pandel, "Effect of Calcium Carbonate on Reduction Behavior on Mill Scale" , Procedia Earth and Planetary Science (Elsevier) Volume :11 / / 2015 DOI: 10.1016/j.proeps.2015.06.067
  • 2014
  • Ashok Sharma, Upender Pandel, Vatsala Chaturvedi, "Energy efficiency in casting of magnesium alloys" , Indian Foundry Journal (Indian Foundry Journal) Volume :06 / 53- 56 / 2014
  • 2012
  • Mathur, Y. B., Poonia, M. P., Pandel, U., Singh, R., "Performance and Emission Characteristics of Diesel Engine Using Low Concentration Thumba Oil Diesel Blends" , International Journal of Wind and Renewable Energy (--) Volume :1 / 108-113 / 2012
  • 2011
  • Poonia M.P, Bhardwaj A, Jethoo A.S and Pandel U, "Design and Development of Energy Efficient Multi-Utility Desert Cooler" , Universal Journal of Environment Research and Technology (Universal Journal of Environment Research and Technology) Volume :1 / 39-44 / 2011
  • Sharma Ashok ,Sharma Nikhil, Pandel U, "Aluminium Scrap Recycling: Environmentally Benign Process" , Alucast Journal (Alucast Journal) Volume :74 / 24-29 / 2011
  • Awadesh Kumar, M.P. Poonia, Upender Pandel and Jethoo A.S., "FMEA: Meyhodology, Design and Implementation in a Foundry" , IJEST (International Journal of Engineering Science and Technology) Volume :3 / 5288-5297 / 2011
  • M.P. Poonia, A. Bhardwaj, A.S. Jethoo, and U. Pandel, "Experimental Investigation on Engine Performance ND Exhaust Emission in an LPG Diesel Dual Fuel Engine" , International Journal of Environment Science and Development (International Journal of Environment Science and Development) Volume :02 / 418-422 / 2011
  • 2005
  • Ashok Sharma , D.B. Goel ,U.Pandel, "Properties and performance of continuous casting mould fluxes" , Indian Foundry Journal (Indian Foundry Journal) Volume :1 / 81-85 / 2005
  • Ashok Sharma, D.B. Goel, U.Pandel, "Study on the effect of vibrations during solidification on cast Al-Si alloys" , Indian Foundry Journal (Indian Foundry Journal) Volume :3 / 42-45 / 2005

    2020
  • Sunil Kumar Jatav, Vijay Kumar Pandey, U. Pandel, Parimal P. Kulkarni, A. K. Nayak, Rajendra Kumar Duchaniya, "Effect of Soaking Time at 1100oC on Morphology and Thermo-Physical Properties of CaO-Fe2O3 (26:74 by wt.%) Simulant Material for Nuclear Reactor" , International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN) by :International Conference on Advances in Mechanical Engineering and Nanotechnology at Manipal Univertsity at JAIPUR / / 2020
  • Premlata, Upender Pandel, Rajendra Kumar Duchaniya, "Review on Wear Performance of High Entropy Alloys" , International Conference on Recent Trends in Science, Engineering and Mathematics-2020 by :International Conference on Recent Trends in Science, Engineering and Mathematics at Goa / / 2020
  • 2019
  • Vijay Kumar Pandey, R. K. Duchaniya, U. Pandel, Surjeet Yadav, "Behavior of Thermophysical Properties of Heat Treated CaO-Fe2O3 at Different Temperature" , International Conference on Advances in Mechanical Engineering and Nanotechnology by :International Conference on Advances in Mechanical Engineering and Nanotechnology at Jaipur / / 2019
  • Vijay Kumar Pandey, Sunil Kumar Jatav, U. Pandel, R. K. Duchaniya, "Microstructural Analysis of CaO-Fe2O3 Heat Treated at Different Temperature" , International Conference on Recent Trends in Sciences, Engineering and Management by :International Conference on Recent Trends in Sciences, Engineering and Management at Jaipur / / 2019
  • Sunil Kumar Jatav, Vijay Kumar Pandey, Parimal P. Kulkarni, U. Pandel, A. K. Nayak and R. K. Duchaniya, "Effect of Air-Quenching on Properties of CaO-Fe2O3 and CaO-B2O3 Simulant Materials for Nuclear Reactor" , International Conference on Recent Trends in Sciences, Engineering and Management by :International Conference on Recent Trends in Sciences, Engineering and Management at Jaipur / / 2019
  • 2018
  • Vijay Kumar Pandey, R. K. Duchaniya, U. Pandel, Sunil Jatav, Shrikant, "Analysis of Thermophysical Properties of CaO-Fe2O3" , International Conference on Recent Trends in Science, Engineering and Management by :International Conference on Recent Trends in Science, Engineering and Management at Jaipur / / 2018
  • Neelam Meena, Rajendra Kumar Duchaniya, Upender Pandel, "Synthesis and Characterzation of Graphene Oxide and Graphene Oxide Doped Poly Vinyl Alcohol (PVA) Nanocomposite Thin Film" , International Conference on Emerging Trends in Materials and Mechanical Engineering by :International Conference on Emerging Trends in Materials & Mechanical Engineering at Jaipur / / 2018
  • Shrikant, S. K. Jatav, P. P. Kulkarni, U. Pandel, A. K. Nayak, R. K. Duchaniya, "Investigation of Simulant Material With Different Temperatures and Its Melt Pool With Quenching Behaviour" , International Conference on Emerging Trends in Materials and Mechanical Engineering by :International Conference on Emerging Trends in Materials & Mechanical Engineering at Jaipur / / 2018
  • Sunil Kumar Jatav, Parimal P. Kulkarni, U. Pandel, A. K. Nayak and R. K. Duchaniya, "A Study on the Characterizations of a Binary Mixture CaO-Fe2O3 (22:78 by wt.%)" , International Conference on Recent Trends in Science, Engineering and Management by :International Conference on Recent Trends in Science, Engineering and Management at Jaipur / / 2018
  • Sunil Kumar Jatav, Shrikant, Rajendra Kumar Duchaniya, Upender Pandel and A. K. Nayak, "A Study on the Properties and Characterization of Non-Irradiate and Irradiate Redmud Brick Sample" , International Conference on Emerging Trends in Materials & Mechanical Engineering by :International Conference on Emerging Trends in Materials & Mechanical Engineering at Jaipur / / 2018
  • 2017
  • Vandana Kaler, R.K. Duchaniya, U. Pandel, "Development of TiO2/PVA Nanocomposites for Applications in Solar Cells" , Materials Processing and Characterization (ICMPC-2017) by :Materials Today at Hyderabad / / 2017
  • 2015
  • Shrikant, R.K. Duchaniya, U. Pandel , "Review of Melt Coolability During a Severe Accident for the Current Light Water Reactors (Lwrs)" , 3rd International Conference on Advance Trends in Engineering & Technology (ICATET) by :AICTE at Jaipur / 152 / 2015 ISBN: 978-81-925882-3-0
  • Vandana Kaler, R.K. Duchaniya, U. Pandel, "Silver Doped Poly Vinyl Alcohol Nanocomposites" , 3rd International Conference on Advance Trends in Engineering & Technology (ICATET) by :AICTE at JAIPUR-INDIA / 162 / 2015 ISBN: 978-81-925882-3-0
  • Vandana Kaler, Dr. R. K. Duchaniya, Prof. U. Pandel, "Synthesis of Titanium Dioxide Nanoparticles via Sol-Gel Method" , International Conference on Emerging Technologies: Micro to Nano 2015 by :American Institute of Physics at Jaipur / / 2015
  • Shrikant, Dr. R. K. Duchaniya, Prof. U. Pandel, Dr. A. K. Nayak, "Quenching Behavior of Molten Pool With Different Strategies - a Review" , International Conference on Condensed Matter and Applied Physics- ICC 2015 by :American Institute of Physics at Bikaner / / 2015
  • Shrikant, Dr. R. K. Duchaniya, Prof. U. Pandel, Dr. A. K. Nayak, "Studies of Quenching Behavior of Molten Pool With Different Strategies" , International Symposium on Frontier of Molecular Science and Technology by :MNIT at Jaipur / / 2015
  • Vandana Kaler, Dr. R. K. Duchaniya, Prof. U. Pandel, "Characterization Studies of Titanium Dioxide Nanoparticles" , International Symposium on Frontier of Molecular Science & Technology by :MNIT, Jaipur at Jaipur / / 2015
  • Rahul Sen, N.C.Upadhayay, Upender Pandel, "BIO-DEGRADABLE COMPOSITE MADE FROM STARCH and COCONUT FIBER : MECHANICAL STRENGTH and BIODEGRATION CHRACTERSTICS" , International Journal of Scientific and Engineering Research by :International Journal of Scientific and Engineering Research at New Delhi / 2394 3386 / 2015
  • Vatsala Chaturvedi, Upender Pandel, "Improvement of Mechanical Properties by Vibration on AZ91 During Solidification" , Management and Applied Sciences by :International Journal of Engineering Technology at New Delhi / / 2015
  • 2014
  • Rahul Sen, Upender Pandel, "Direct Reduction of Mill Scale by Low Grade Coal: An Industrial Waste Recover Approach" , International Conference on Advances in Chemical Engineering and Technology by :TKM College of Engineering and Technology,Kollam at Kollam / / 2014
  • 2013
  • Vatsala Chaturvedi, Rahul Sen, Upender Pandel, "An Overview of Improvement of Properties of AZ91 Mg Alloy by Grain Refinement Through Vibration" , International Conference on Advance Trends in Eng. & Tech by :International Conference on Advance Trends in Eng. & Tech, Organized by Arya College Jaipur at jaipur / / 2013
  • Rupali Baghel, Rahul Sen, Vatsala Chaturvedi, "An Overview of Utilization of Marble Slurry as Construction Material" , International Conference on Advance Trends in Eng. & Tech by :International Conference on Advance Trends in Eng. & Tech, Organized by Arya College Jaipur at Jaipur / / 2013
  • 5. Vatsala Chaturvedi, Upender Pandel, Ashok Sharma, "An Overview of Effect of Vibration on AZ91 Mg Alloy During Solidification" , National Conference on Recent Trends in Materials Engineering by :National Conference on Recent Trends in Materials Engineering, Organized by BRCM College of Engineer at Bahal, Haryana / / 2013
  • Isha Thapa, Satender Dahiya, Vatsala Chaturvedi, "Improvement in the Performance and Effectiveness of Internal Combustion Engines With the Application of Ceramic Coatings" , Proceedings of International Conference of Alternative Fuels for I.C. Engines by :Proceedings of International Conference of Alternative Fuels for I.C. Engines, Organized by Departme at MNIT Jaipur / 44 / 2013
  • Swati Garnaik, S. Sindal, B. Majhi, N. Birjarnia and U. Pandel, "Corrosion and Its Prevention Techniques" , National Conference on Recent Trends in Materials Engineering by :National Conference on Recent Trends in Materials Engineering, Organized by BRCM College at Bahal, Haryana / / 2013
  • 2012
  • Isha Thapa, Upender Pandel,, "Review on Utilization of Fly Ash as a Ceramic Material" , Nanotechnology Application (NTA-2012) by :The Institution of Engineers Rajasthan Chapter Jaipur, MNIT Jaipur at MNIT Jaipur / / 2012
  • 2011
  • S. Kumar, U. Pandel and M. P. Poonia, "A Comparative Study of Air Pollution Standards of Vehicles for Different Countries" , International Conference on Mechanical Engineering by :International Conference on Mechanical Engineering Held at Bangladesh at Dhaka, Bangladesh / / 2011
  • U. Pandel, S. Kumar, and M. P. Poonia, "Utilisation of Bio-Gas in Internal Combustion Engines" , International Conference on Mechanical Engineering by :International Conference on Mechanical Engineering’Held at Bangladesh at Dhaka, Bangladesh. / / 2011
  • 2007
  • Shweta Chokhra, Nikhila Sharma, Smriti Patodi and U. Pandel, "Thermal Spray Coatings for Corrosion Control" , All India Seminar on Surface Coatings and Corrosion Resistance by :All India Seminar on Surface Coatings and Corrosion Resistance, Organized by IE at Jaipur / / 2007
  • Swati Garnaik, S. Sindal, B. Majhi, N. Birjarnia and U. Pandel, "Surface Coatings by Ceramic Materials" , All India Seminar on Surface Coatings and Corrosion Resistance by :All India Seminar on Surface Coatings and Corrosion Resistance, Organized by IE Jaipur at Jaipur / / 2007
  • Swati Garnaik, S. Sindal, B. Majhi, N. Birjarnia and U. Pandel, "100 % Solid Polyurethanes Protective Coatings for Pipelines" , All India Seminar on Surface Coatings by :All India Seminar on Surface Coatings Organized by IE ,Jaipur at Jaipur / / 2007
  • Shweta Chokhra, Nikhila Sharma, Smriti Patodi and U. Pandel, "Corrosion Prevention by Nanomaterials" , All India Seminar on Surface Coatings and Corrosion Resistance by :All India Seminar on Surface Coatings and Corrosion Resistance, Organized by IE Jaipur at Jaipur / / 2007
  • Jitendra Kumar Singh and U. Pandel, "Corrosion and Its Prevention in Bio-Medical Materials" , All India Seminar on Surface Coatings and Corrosion Resistance by :All India Seminar on Surface Coatings and Corrosion Resistance, Organized by IE Jaipur at Jaipur / / 2007
  • 2006
  • Swati Garnaik, J. Bodhwani, B. Majhi and U. Pandel, "Energy From Bio-Mass and Environmental Effect" , National Conference on Energy and Environment by :National Conference on Energy and Environment, Organized by JEC Kukas at JEC Kukas / / 2006
  • 2005
  • U. Pandel and A. Sharma, "Bio Technology for Recovery of Metals From Minerals : An Economic Alternative" , Symposium on Role of Mineral Sector in Integrating India With Global Economy by :Symposium on Role of Mineral Sector in Integrating India With Global Economy, Organized by IIM at Khetri Nagar / / 2005
  • 2004
  • Singh, U. N Pandel and A. Sharma, "Advances in Mould Fluxes for Continuous Casting Process" , National Seminar on Intelligent Processing of New Material by :National Seminar on Intelligent Processing of New Materials, Organized by IE at Jaipur / / 2004
  • 2003
  • U. Pandel, "Geo-Thermal Power Production – an Option for Future" , Conference Proceedings, Energy and Environmental Technologies for Sustainable Development by :Conference Proceedings, Energy and Environmental Technologies for Sustainable Development at MREC, Jaipur, India. / / 2003
  • J. Mathur, M. P. Poonia, U. Pandel and S. Malik , "Development of a Mini Bio-Mass Gasifier for Conversion of Waste to Energy" , National Renewable Energy Convention by :National Renewable Energy Convention, Coimbatore at Coimbatore / / 2003
  • J. Joshi, U. Pandel and B. S. Joshi, "Heavy Metals Contamination by Sewage Sludge (Bio-Solids) Amended Soils" , Conference Proceedings, Energy and Environmental Technologies for Sustainable Development by :Conference Proceedings, Energy and Environmental Technologies for Sustainable Development at MNIT, Jaipur, India. / / 2003
  • S. Mehtab, U. Pandel and M. P. Poonia, "Vermicompost- a Viable Option of Chemical Fertilizers" , Conference Proceedings, Energy and Environmental Technologies for Sustainable Development by :Conference Proceedings, Energy and Environmental Technologies for Sustainable Development at MNIT, Jaipur, India. / / 2003
  • P.K. Pandey, D. Bhattacharya D. and U. Pandel, "Risk in Exploration of Biogas Technology: Prospects and Unutilized Potential in Rural Energy Development" , Conference Proceedings, Energy and Environmental Technologies for Sustainable Development by :Conference Proceedings, Energy and Environmental Technologies for Sustainable Development at MNIT, Jaipur, India. / / 2003
  • 2002
  • U. Pandel, H.C. Aggarwal, K. L. Narang, and M. K. Bhargava, "Environmental and Waste Management in Non-Ferrous Metallurgical Industries" , Conference Proceedings, Waste to Energy by :Conference Proceedings, Waste to Energy at MREC, Jaipur, India. / / 2002
  • U. Pandel, H. C. Aggarwal, K. L. Narang, and M. K. Bhargava, , "Waste Management in Iron and Steel Industry" , Conference Proceedings, Waste to Energy by :Conference Proceedings, Waste to Energy at MREC, Jaipur, India / / 2002
  • 2001
  • S. R. Jangid, U. Pandel, A. Sharma, K. L. Narang and T. V. Rajan, "Mould Fluxes for Continuous Casting- State of Art" , Proceedings of 49th Indian Foundry Congress by :Proceedings of Indian Foundry Congress at New Delhi. / / 2001
  • M. P. Poonia, U. Pandel, and S. Kumar, "A Comparative Study of Air Pollution Standards of Vehicles for Different Countries" , Presented at Jodhpur Polytechnic on Nov. 17, in AICTE Sponsored Training Program. by :Presented at Jodhpur Polytechnic in AICTE Sponsored Training Program. at Jodhpur / / 2001
  • 2000
  • M. P. Poonia, U. Pandel, and S. Kumar, "Utilization of Bio-Gas in Internal Combustion Engines" , Paper Presented at Udaipur in a Training Program by : Paper Presented at Udaipur in a Training Program at Udaipur / / 2000
  • 1998
  • U. Pandel, A. Sharma A. and T.V. Rajan, "Improvement in Wear Resistance of Caste Al-Si-Cu Alloys by Vibrations" , International Symposium on Frontiers in Materials Processing by :International Symposium on Frontiers in Materials Processing, Organized by IIM, at Bangalore / / 1998
  • U. Pandel, S. Kumar, R. K. Yadav and A. B. Gupta, "A Study on Toxic Effects of Aluminum in Drinking Water" , International Symposium on Frontiers in Materials Processing by :International Symposium on Frontiers in Materials Processing, Organized by IIM at Bangalore. / / 1998
  • 1992
  • U. Pandel, "Energy Conservation in Melting of Copper and Copper Alloys in Electric Furnaces" , National Seminar on Energy Conservation in Industry by :National Seminar on Energy Conservation in Industry, Organized by IE Jodhpur at Jodhpur / / 1992
  • 1987
  • U. Pandel, A. Sharma. and T. V. Rajan, "Effect of Vibrations on Some Caste Al-Si-Cu Alloys" , US Workshops on Principles of Solidification and Materials Processing, Organized by DMRL, Hyderabad by :US Workshops on Principles of Solidification and Materials Processing, Organized by DMRL, Hyderabad at Hyderabad / / 1987

  • Reference Book, "Waste To Energy" ISBN:81-8229-002-3 published by - Prime Publishing House Delhi Year: 2004 authors- Prof. Upender Pandel, Prof. M.P. Poonia, Prof. Jyotirmay Mathur & Prof. Sanjay Mathur
  • Reference Book, "Energy Technologies For Sustainable Development" ISBN:81-8229-000-7 published by - Prime Publishing House Delhi Year: 2004 authors- Prof. Upender Pandel & Prof. M.P. Poonia
  • Reference Book, "Environmental Technologies For Sustainable Development" ISBN:81-8229-001-5 published by - Prime Publishing House Delhi Year: 2004 authors- Prof. Upender Pandel & Prof. M.P. Poonia
  • Text Book, "Environmental Engineering Experiments" ISBN:81-8047-099-7 published by - Jaipur Publishing House Year: 2008 authors- Prof. Upender Pandel, Dr. Chandani Kriplani, Dr. Pallavi Mishra & Dr. Archana saxena
  • Text Book, "Production Systems Management" ISBN:81-8014-100-4 published by - Standard Publishers Distributors Delhi Year: 2006 authors- Prof. Upender Pandel, Prof. M.P. Poonia & Dr. B.L. Salvi

  • Book Chapter, "Analysis of the Tribological Behaviour of AL6061 Alloy-Graphene Oxide Composites" ISBN:9781003093213 published by - Taylor and Francis, CRC Press Year: 2021 authors- Prof. Upender Pandel, Dr. Rajendra Kumar Duchaniya, Atirek Gaur

  • Life Member of Indian Society of Technical Education , (ISTE)
  • Life Member of Indian Institute of Metals

    Awarded
  • Sunil Kumar Jatav on Investigation of Melt Coolability with Bottom Ingression of Coolant on CaO-Fe2O3 Simulant Material Year - 2021
  • Vijay Kumar Pandey on Study of Thermophysical Properties and Heat Transfer Using Non-prototype Material (CaO-Fe2O3) for Nuclear Reactor Year - 2021
  • Mukesh Chourasia on Additive design for ultra-high strength steel toughness Year - 2020
  • Ravindra Singh on Studies on Mechanical, Electrical and Thermal Properties of AlN-SWCNT Composite Year - 2020
  • Krishna Kumar on Synthesis & Characterization Studies of Graphene Based Magnetic composites Year - 2019
  • Vandana Kaler on Studies of Thermal and Mechanical properties of nano-Titanium dioxide doped PVA Nanocomposites Year - 2019
  • Rahul Sen on Study of Reduction Kinetics of Mill scale by low grade coal Year - 2018
  • Shrikant on Studies of quenching behavior of bottom flooded molten pool status Year - 2018
  • Vatsala Chaturvedi on Study on the Effect of Vibrations during Modification on AZ 91 Magnesium Alloys Year - 2017
  • Robin Gupta on Study of Microstructure and Mechanical Properties of Aluminium Alloys Cast by Rapid Slurry Formation (RSF) Techniques Year - 2017
  • Akshay Kumar on Development of technology production of conducting sheath over soft magnetic materials Year - 2017
  • Anurag Hamilton on Characterization and Erosion Behaviour study of Carbide based Thermal Spray Coatings on Steel Year - 2017
  • Ashwini Sharma on A study on adoption of e- negotiation through software agents Year - 2012
  • Y.B. Mathur on on Economics, combustion and performance assessment of a bio-diesel engine Year - 2012
  • Nemi Chand Singh on Impact of IT interventions in the management of Govt. Engg. Colleges Rajasthan Year - 2012
  • Anand Kumar on Physico-chemical investigation of air borne particles in Jaipur city Year - 2011
  • Ongoing
  • Premlata on Improvement in Electrochemical Properties of High Entropy Alloys Coatings Incorporated with Carbon Nanotubes via Electrodeposition Route on Mild Steel Substrate Year - 2019
  • Mansha Mohan on Nanocomposite Based high entropy alloys and graphene oxide coating on mild steel Year - 0
  • Atirek Gaur on Coatings of Copper Based High Entropy Alloy on Steel Substrate Year - 0
  • Rahul Saini on Nickel based high entropy alloys coatings on steel substrate Year - 0
  • Tushar Kulshreshtha on Yet to be Decided Year - 0

Title Total Outlay
(In Lacs)
Year Funding Agency Role
The coating of CuNiFeCrMo-Graphene Oxide nanocomposites on CFRP- Carbon Fiber Reinforced Plastics/ Composites to improve thermal conductivity and electrical conductivity properties of CFRP25.002021-2024ISROPI
Reducing power consumption Increasing the yield of the casting through induction melting.2.302017-2017SHREE VAIBHAV METACAST PVT LTD JaipurPI
Quenching Behavior of Bottom-Flooded Molten Pool35.002016-2021BRNS,BARCCo-PI
Effect of microstructure on shock behavior of SiC ceramics of armor application,DRDO38.002014-2018DRDOPI
Improving the quality of Aluminum-Silicon alloys Automotive casting through Grain Refinement1.002014-2015ALUCAST PunePI
Development of MoSi2 heating rod element for high temperature furnace, Naskar and Company, Kolkatta17.502013-2015NASKAR & Company KolkataPI
Development of lab for advance coating by Plasma and Laser techniques9.001999-2002MHRD New DelhiPI
Development and Characterization of Continuous casting mould fluxes, AICTE New Delhi5.001997-1999AICTE New DelhiPI
Microwave as a probe to Estimate Metal in its Ore through the Study of Particulate Behavior of Basic Electronic Materials, DST, Rajasthan2.881995-1998DST RajasthanPI

  • Chief Warden in MNIT Jaipur from - 17-06-2016 to Till Date
  • HEAD in Metallurgical and Materials Engg., MNIT Jaipur from - 16-03-2012 to 01-07-2016
  • Principal(Additional Charge) in GOVERNMENT ENGINEERING COLLEGE BIKANER, RAJASTHAN from - 09-06-2009 to 29-08-2009
  • Principal(Additional Charge) in GOVERNMENT ENGINEERING COLLEGE BHARATPUR, RAJASTHAN from - 28-02-2009 to 14-07-2010
  • Principal(Founder Principal) in GOVERNMENT ENGINEERING COLLEGE JHALAWAR, RAJASTHAN from - 15-09-2007 to 14-09-2010
  • Dean Student Welfare in MNIT Jaipur from - 31-10-2006 to 14-09-2007
  • Faculty In-charge Security in MNIT Jaipur from - 10-01-2006 to 14-09-2007
  • Faculty In-charge Vechicle in MNIT Jaipur from - 10-01-2006 to 14-09-2007
  • Proctor in MNIT Jaipur from - 12-09-1998 to 11-09-2002

  • "ALLOY MIXING AND CASTING MACHINE", Dr. Vatsala Chaturvedi, Dr. Deepak Patel, Prof. Upender Pandel , Reg.No. 387094-001 [The Patent Office, Government of India] Awarded Dt.25-01-2024
  • "Development of Robust Super-Hydrophobic Plasma Sprayed High Entropy Alloy Coating", Swati Sharma, Atirek Gaur, Rahul Kumar, Satish Indupuri, Upender Pandel, Anup Kumar Keshri , Reg.No. 202311035693 [The Controller of Patents, The Patent Office Branch, Delhi] Filed Dt.23-05-2023
  • "Production of Fine grained Ultra high Hardness Steel by powder metallurgy", Prof. Upender Pandel, Prof. M.K. Banerjee & Dr. Akshay Kumar , Reg.No. 201711004203 [MNIT Jaipur] Filed Dt.02-02-2017
  • "A Metal Matrix Nanocomposite (Conducting Magnet) and Process of Synthesis of Nanocomposite by High Energy Ball Milling", Prof. Upender Pandel, Prof. M.K. Banerjee & Dr. Akshay Kumar , Reg.No. 201711004204A [MNIT Jaipur] Filed Dt.11-08-2016

SNo. Type Title Event Place Schedule
1KeynoteMAPPING COURSE, PROGRAMME & PROGRAMME SPECIFIC OUTCOMES WITH VISION AND MISSION OF THE INSTITUTE & ASSESSING THEIR ATTAINMENTWORKSHOPBanasthali Vidyapith RajasthanFeb-2020
2KeynotePREPERATION FOR NBA ACCREDITATIONWORKSHOPGovt. Engg. College, BharatpurOct-2019
3KeynoteWorkshop on File Preperation for NBA AccreditationWORKSHOPMITRC ALWARMar-2019
4KeynoteSAR Report for NBA AccreditationWORKSHOPMITRC ALWARNov-2018
5KeynoteNBA ACCREDITATION AND QUALITY MANAGEMENTWORKSHOPMITRC ALWARAug-2018
6Keynoteexpert visit for guidance and to check the NBA prepared report of departmentsWORKSHOPGovt. Mahila Engg. College, Nasirabad Road, Makhupura, AjmerApr-2016
7KeynoteSelf Assesment Report for NBA AccreditationWORKSHOPNITTTR CHANDIGARHMar-2015

S.No. Category Name of Activity Organization Place Position Schedule
1Nationalworkshop on Self Assesment Report for NBA AccreditationNITTTR CHANDIGARHCHANDIGARHCHIEF GUESTMar-2015
2NationalImplementation of skill Developement programme under Pradhan Mantri Kaushal vikash yojana(PMKVY)AICTE New DelhiDelhiMember of the committee Aug-2016
3NationalPromoting Hindi language in Technical Education SystemAICTE New DelhiDelhiExpertJun-2017
4NationalInteraction with students Gov. Mahila Engg. College AJMERAjmerChief GuestMay-2017
5NationalResearch Advisory committee of Material Science DivisionShriram Institute of Industrial Research DelhiDelhiMember of Advisory CommitteeFeb-2017
6NationalWORKSHOPSARTHAK EDUCATIONAL TRUSTJAIPURBOARD MEMBERApr-2017
7NationalANNUAL FUNCTIONMITRC ALWARALWARCHIEF GUESTMar-2019
8NationalTECHNICAL DISCUSSION WITH JSL OFFICIALSJINDAL SAW LIMITED BHILWARABHILWARAFACULTY(GROUP LEADER)Mar-2019
9NationalWORKSHOPBANASTHALI VIDYAPITH RAJASTHANBANASTHALICHIEF GUESTFeb-2020